Skip to main content

A Comparison of Tonal Noise Characteristics of Large Multicopters with Phased Rotors

This study examines the acoustic behavior in hover of manned -size, multirotor, eVTOL aircraft in the classical quadcopter, hexacopter, and octocopter configurations. The rotors are assumed to have collective pitch control and operate at a specified RPM, with orthogonal and tip-to-tip rotor phasing considered. All configurations have the same disk loading and tip Mach number, with the rotor radius decreasing and RPM increasing, going from the quadcopter to the octocopter. The simulations use the Rensselaer Multicopter Analysis Code for the aerodynamic loads on the blades, coupled to an acoustic propagation code for noise predictions at selected observer locations. From the simulation results, orthogonal phasing between rotors is shown to produce significant noise reductions along interboom bisectors (between 9 and 14 dB relative to an equivalent single rotor, at 6 lb/ft2 disk loading and 0.51 tip Mach number). Further reducing the tip Mach number not only reduces the propagated noise but produces even deeper regions of quiet along the interboom bisectors (18–25 dB quieter at 3 lb/ft2 with 0.36 tip Mach number). An examination of the sound pressure level frequency spectra indicates that smaller faster spinning rotors (going from the quadcopter to octocopter) produce more tonal peaks at higher frequencies which would result in penalties in A-weighted noise.

Reference

Smith, B., Gandhi, F., and Niemiec, R., "A Comparison of Tonal Noise Characteristics of Large Multicopters with Phased Rotors ,"

Journal of the American Helicopter Society, Jan 10, 2023.